Low size, weight and power (SWaP) module designed for easy integration
A-PNT
.
..
.
Powerful solutions designed to meet your Assured PNT needs for when GPS/GNSS is degraded or unavailable. The ALTM GEN2 is a family of standardized, alternative location and timing modules that provide position, navigation and timing (PNT) information. The ALTM GEN2 Mini is mission-ready with the highest U.S. DoD Technology Readiness Level (TRL) of 9, offering a low SWaP (size, weight, and power) that is ideal for use in dismounted, ground-vehicle and airborne operations. The ALTM GEN2 Mini receiver consists of an Iridium STL satellite receiver, UART for serial port input for high-accuracy commercial or military GPS, UART serial port for data I/O and a 1-PPS timing signal.
Iridium STL
| Dimensions: | 2.425” (61.1 mm) x 1.675” (42.5 mm) x 0.270” (6.86 mm) |
| Weight: | 12.9 g (0.455 oz) |
| Input Voltage: | 4.0 – 5.5 VDC |
| Avg. Current Consumption: | 210mA @ 5.0 VDC |
| Operating Temp: | -40°C to +85°C (-40°F to +185°F) |
| Interface Connector: | 2x Hirose DF40C-40DP-0.4V(51) |
| Mating Connector: | Hirose DF40HC-(4.0)-40DS-0.4V(51) |
| AltNav Connector: | U.FL Connector Receptacle, Male, Surface Mount |
| Mounting: | 4x Mounting Holes, 0.095″ OD |
| Avg. Power: | 1.05 ± 0.1W |
| Recommended Antenna: | Passive Iridium Helical |
| Static Position Accuracy: | Typically < 25m |
| Dynamic Position Accuracy: | Typically < 200m |
| Timing Accuracy: | < 300ns RMS |
| Cold Startup Time: | Typical 3 – 5 minutes to < 50m, Cold Start |
| Hot Startup Time: | Typical 2 – 3 minutes to 50m, Initial Guess |
